
DESIGN
INSPECTION
LIDAR

Laser-accurate scans of parts, tooling and sites, delivered as mesh or point cloud.
Prefer to bring it in-house? We supply the scanners, printers and software we use.
See equipment
Component inspection, damage assessment and reverse engineering of legacy parts.
Prefer to bring it in-house? We supply the scanners, printers and software we use.
See equipmentDESIGN
INSPECTION
LIDAR

Laser-accurate scans of parts, tooling and sites, delivered as mesh or point cloud.
Prefer to bring it in-house? We supply the scanners, printers and software we use.
See equipment
Component inspection, damage assessment and reverse engineering of legacy parts.
Prefer to bring it in-house? We supply the scanners, printers and software we use.
See equipmentAn industrial 3D printer is defined less by price than by repeatability: a heated chamber, a rigid frame, closed-loop calibration and materials such as carbon fibre, nylon and PEEK. MAKE3D is the Official Distributor of CreatBot and Mingda in Singapore, and also supplies Nexa3D industrial resin printers. Build volumes run from 620 mm per side up to 1200 x 1050 x 1050 mm, and our demos, training and local support are in Singapore. If you need parts rather than a machine, our 3D printing service runs the same work. Tell us the part size, material and quantity on WhatsApp.
We supply CreatBot for large heated-chamber FDM and high-temperature polymers, Mingda for large-format signage printing, and Nexa3D for fast industrial resin. Each brand covers a different job, so match the brand to the material and size rather than choosing by name.
| Brand | Technology | Best for | Models we list |
|---|---|---|---|
| CreatBot | FDM, heated chamber | Large engineering parts, carbon fibre and nylon, high-temperature polymers | D600 Pro3 HS, D1000 Pro HS, D800 Ultra, D1200 Ultra, PEEK-250, PEEK-300 |
| Mingda | Large-format FDM | Signage, channel letters, mass production | AD-F4 Pro |
| Nexa3D | LSPc resin | High-speed, larger resin parts | XiP Pro, NXE 400 Pro |
See our industrial FDM 3D printers, the CreatBot range and the Mingda range.
By build volume, the CreatBot D1200 Ultra is the largest at 1200 x 1050 x 1050 mm, the D1000 Pro HS offers 1050 x 1050 x 1050 mm, and the Mingda AD-F4 Pro prints 1200 x 800 x 100 mm for flat signage. For large-format parts that must come off in one piece, these remove the need to split and glue.
| Model | Build volume | Key stated specs |
|---|---|---|
| CreatBot D600 Pro3 HS | 620 x 620 x 620 mm | Nozzle up to 420 C; chamber up to 80 C; up to 300 mm/s |
| CreatBot D800 Ultra | 800 x 650 x 650 mm | IDEX dual extruders to 420 C; chamber 80 C; stated top speed 1100 mm/s; printing accuracy +/-0.05 mm per 100 mm (stated) |
| CreatBot D1000 Pro HS | 1050 x 1050 x 1050 mm | Nozzle up to 420 C; chamber up to 80 C; independent quad Z-axis; up to 300 mm/s |
| CreatBot D1200 Ultra | 1200 x 1050 x 1050 mm | IDEX; chamber 80 C; quad Z-axis; stated top speed 1100 mm/s |
| Mingda AD-F4 Pro | 1200 x 800 x 100 mm | 4-colour feeding; up to 300 mm/s; SignMaker channel-letter software; WAN/LAN monitoring |
See also our large-format 3D printing options for signage and automotive prototypes.
Equipment






For carbon fibre, nylon, polycarbonate and ABS, the heated-chamber CreatBot D600, D800, D1000 and D1200 are the starting point, with chambers up to 80 C. For ultra high-performance polymers such as PEEK and PEI, choose the CreatBot PEEK-250 or PEEK-300.
| Model | Notes from the product page |
|---|---|
| CreatBot PEEK-250 | Build volume 250 x 250 x 300 mm; hot chamber up to 200 C; prints filaments below 500 C; for PEEK and PEI |
| CreatBot PEEK-300 | Direct Annealing System adjustable 0 to 200 C; nozzle temperature up to 500 C per page; medical and industrial applications; build volume not stated |
Tell us the material and part geometry and we will confirm suitability before you order.
The main cost drivers are build volume, chamber and nozzle temperature, extruder system (single, dual, IDEX), frame rigidity and Z-axis design, software and firmware, and the support package. Consumables, drying equipment and training add to the first-year budget. We do not publish prices; we quote the machine, accessories, training and warranty separately.
Ask whether you need the largest volume or the right material first: a 620 mm cube with a heated chamber handles many engineering parts at a lower budget than a 1 m class machine. Your WhatsApp message with part size, material and quantity is enough for us to propose the right tier.
If you print regularly, buy a machine; if you need a few parts, use a service. MAKE3D does both: we sell and support industrial printers, and our 3D printing service covers resin, FDM, SLS, SLM and CNC through our own machines and a partner network. We also scan and reverse engineer existing parts, so a broken or legacy component can be measured, modelled and printed in one workflow.
See our 3D scanning and reverse engineering services.
Video
Tell us the part size, material and quantity. We will recommend a printer or quote the print as a service.
The right brand depends on the job. We supply CreatBot for large heated-chamber engineering parts and high-temperature polymers, Mingda for large-format signage, and Nexa3D for fast industrial resin. Send us your part size and material and we will recommend one.
Cost depends on build volume, chamber and nozzle temperature, extruder system and support. We do not publish prices; a quote lists the machine, accessories, training and warranty separately. WhatsApp us the part size, material and quantity for a tailored quote.
MAKE3D supplies CreatBot, Mingda and Nexa3D industrial printers in Singapore, with demos, installation, training, local repair and servicing and a 1-year warranty. Contact us on WhatsApp to arrange a demo at our office or your site.
The CreatBot D1200 Ultra offers 1200 x 1050 x 1050 mm, the D1000 Pro HS offers 1050 x 1050 x 1050 mm, and the Mingda AD-F4 Pro prints 1200 x 800 x 100 mm for signage. Which is largest depends on whether you need height or footprint.
The CreatBot D600 Pro3 HS lists carbon fibre, nylon, polycarbonate and ABS, with a chamber up to 80 C. The D800 and D1200 Ultra list CF/GF grades, nylon and PC. For PEEK, choose the PEEK-250 or PEEK-300.
Yes. Our 3D printing service covers resin, FDM, SLS, SLM and CNC through our machines and partner network. Send your file, material and size on WhatsApp and we will advise whether we can print it or whether a machine is the better choice.
Additive manufacturing builds parts layer by layer from a digital file, instead of cutting them from a block. It covers FDM, resin, SLS and metal processes. MAKE3D supplies FDM and resin printers and runs a 3D printing service, with scanning and reverse engineering to feed it.