RM120.00
Official Reseller
FusFun™ ABS-GF is a high-strength ABS-based 3D printing filament with outstanding mechani cal properties. Due to the addition of chopped glass fibers, the tensile strength of its 3D printed parts in the XY axis direction can be close to 40MPa. The glass fiber has also improved its dimensional stability. Therefore, FusFun™ ABS-GF is ideal for printing functional prototypes, jigs and low-volume production parts.
FusFun™ ABS-GF is an ABS-based filament specially developed for 3D printing and it is reinforced with 10% glass fiber. Compared with other ABS filaments, it has a much lower odor and excellent dimensional stability.
| Type | ABS-CF (Black), ABS-GF (Black), ABS-GF (Blue), ABS-GF (Grey), ABS-GF (Orange), ABS-GF (Red) |
|---|
The main raw material of FusFun™ ABS-GF is an ABS resin synthesized by continuous bulk
polymerization technique. Thanks to this advanced production process, the residual amount of
solvents and monomers used in the production process in the final ABS product is so low that
the filament has a low odor during printing.
FusFun™ ABS-GF can be used together with FusFree™ S-Multi Quick-Remove Support
Material to solve the poor surface of complex model above supports.
Additional Suggestions：
1. Compared with PLA, PETG and other materials, ABS materials need a higher chamber
temperature to help release the residual stress during the printing process. Please keep the
printer chamber closed during the printing process. It can effectively avoid printed parts from
warping and cracking. If the device has a heated chamber, it is recommended to set the
temperature of heated chamber between 60-80°C.
2. If the ABS-GF filament has been unpacked for a long time and the printing quality starts to
degrade during the printing process, please dry the filament at 70-80°C for 4-6 hours before
printing.
3. Although FusFun™ ABS-GF has much less odor compared with similar products, it is still
recommended to place the printer in a well-ventilated area during printing.
We are one of the best and holistic 3D printing solution in Singapore and Malaysia. Are you looking to have your creation 3d printed or do you have something you like to create but don’t have the skill set to model it?
© 2023 Make 3D. All rights reserved.
